Matthews 10" Dot, Solid Black

Matthews 10" Dot, Solid Black

Dots are very thin spring steel franes with a mounting pin. Designed to fit Superflex, Flex Arm or a Grip Head. Dots and Fingers are most commonly used for manipulating or controlling light in small areas. Three sizes, 3", 6" and 10" are available. Pin is color coded for easy identification of fabric covering.

List Price: $ 30.24

Price: $ 24.95

12x18" Flag Cutter

12x18" Flag Cutter

The 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the 48"x48" frames have been squared off with the removal of the mouse ears. Flags are square or rectangular frames with mounting pins attached and covered with a solid cloth material. Used to control light, whether natural or artificial. Flags can be used to protect the camera lens from flares or to control spill light from other sources, or keep light from reaching certain areas on the set. Known as Flags up to sizes 24"x36", larger or more irregular sizes are referred to as Cutters, Floppies are Cutters which have an extra layer of material sewn to one edge and held in place with Velcro until needed at which time the Flag or Cutter becomes twice its original size. Use the number with a (B) after it for Bottom Hinge and the number with a (T) after it to specify Top Hinge. All Matthews Scrims and Flags are bordered with heavy duty color coded webbing.

List Price: $ 31.95

Price: $ 32.50

Matthews 4x12" Finger, Artificial Silk, White Reviews

Matthews 4x12" Finger, Artificial Silk, White

List Price: $ 30.24

Price: $ 24.95

Half Single for Omni-Light, Fits Barndoor Frame - 5-1/8

Compensates for light fall off, and rotates 360 degree for each scenario. It requires either the Complete Barndoor Set (O120) or the Barndoor Frame (O121) for mounting.

One half and graduated scrims are used to even the beam spread when lighting a subject or background from an angle. Keep several densities of scrims available, to be prepared for any lighting situation.

List Price: $ 17.50

Price: $ 13.99

Related Products

Matthews 18x24" Open End Scrim, ColorNETT Single Silver

Matthews 18x24" Open End Scrim, ColorNETT Single Silver

The Matthews Open End Scrim is a ColorNETT Single Silver 18 inch x 24 inch / 45.7 cm x 61 cm scrim, that will slightly raise the Kelvin temperature of your light source. The frame is made of spring steel, with a 3/8" pin and support which can be used to hang the scrim from a "C" Stand handle while not being used. The 2 upright arms of the frame are slotted at the 2 open ends for retaining the piano wire that is woven through the fabric, for making up the 4th side of the frame without causing a shadow. The Open end scrims are used for controlling or manipulating light falling on specific areas of the set or subject. They can be used foer altering light without creating a noticeable edge. The Black powder finished frame minimizes any unwanted reflections

List Price: $ 49.49

Price: $ 49.49

Related Products

Matthews Open End 12x18" Single Scrim, Black Reviews

Matthews Open End 12x18" Single Scrim, Black

• Black Single Scrim Fabric
• Approximate Light Loss: 0.6 Stop
• Reduces light intensity without changing the pattern or color temperature
• Flame Retardant Safety Characteristic

Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C-Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the frame without causing a shadow. Open Ends are used to control ormanipulate light falling on certain areas of the set or subject. They can be used to soften or reduce light without a noticeable edge. A color coded binding is used around the frame to identify the fabric. Matthews Open End Frames are black powder coated to minimize unwanted reflections.

List Price: $ 32.95

Price: $ 28.26

More Products

12x18" Open End Double Scrim (Black)

12x18" Open End Double Scrim (Black)

Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the frame without causing a shadow. Open Ends are used to control or manipulate light falling on certain areas of the set or subject. They can be used to soften or reduce light without a noticeable edge. A color coded binding is used around the frame to identify the fabric. Matthews Open End frames are black powder coated to minimize unwanted reflections.

List Price: $ 36.95

Price: $ 36.95

7-3/4" Full Double Scrim for 1000W Studio Fresnel

Scrims are metal screens mounted in a metal frame. They are placed in front of a light to reduce light intensity.

Arri makes four different types of scrims.

Full single- this scrim covers the entire lightface and reduces the intensity of the entire light beam.

Full double - this scrim covers the whole face of the light. It has two metal screens in it, reducing light intensity by two times the amount of the full single.

Half single - this scrim only covers half of the lightface reducing half of the light beams intensity.

Half double - same as the half single but reduces light intensity twice as much as the half single.

List Price: $ 16.95

Price: $ 13.98

Find More Products

Matthews MICROgrip 3" Double Scrim for Tabletop Photography

Matthews MICROgrip 3" Double Scrim for Tabletop Photography

3" Single Scrim made exclusively for MICROgrip. Use to diffuse light in your tabletop photography shoot.

List Price: $ 28.22

Price: $ 19.95

Matthews Open End 18" x 24" Black Triple Scrim

Matthews Open End 18" x 24" Black Triple Scrim

• Approximate Light Loss: 1.8 Stops
• Black Triple Scrim Fabric
• Maximum reduction of light intensity without changing the pattern or color temperature
• May project a moire pattern

Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the frame without causing a shadow. Open Ends are used to control or manipulate light falling on certain areas of the set or subject. They can be used to soften or reduce light without a noticeable edge. A color coded binding is used around the frame to identify the fabric. Matthews Open End frames are black powder coated to minimize unwanted reflections.

List Price: $ 63.50

Price: $ 49.95

Related Products

Matthews MICROgrip 3" Solid for Tabletop Photography Reviews

Matthews MICROgrip 3" Solid for Tabletop Photography

Made exclusively for MICROgrip. Use it to block light in your tabletop photography shoot.

List Price: $ 28.22

Price: $ 21.99

Matthews 18x24" Single Scrim - Black

Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the frame without causing a shadow. Open Ends are used to control or manipulate light falling on certain areas of the set or subject. They can be used to soften or reduce light without a noticeable edge. A color coded binding is used around the frame to identify the fabric. Matthews Open End frames are black powder coated to minimize unwanted reflections

List Price: $ 50.40

Price: $ 31.99

Related Products

Matthews 10" Dot, Double Scrim Black

Matthews 10" Dot, Double Scrim Black

Dots are very thin spring steel franes with a mounting pin. Designed to fit Superflex, Flex Arm or a Grip Head. Dots and Fingers are most commonly used for manipulating or controlling light in small areas. Three sizes, 3", 6" and 10" are available. Pin is color coded for easy identification of fabric covering.

List Price: $ 30.24

Price: $ 24.95

Matthews Half Apple Box - 12" x 4" x 20" Reviews

Matthews Half Apple Box - 12" x 4" x 20"

Apple Boxes are some of the handiest tools to have on the set or in the studio. Use them for propping or leveling, sitting or standing. Nail Wall Plates to them to hold low angle lighting fixtures and multiple other purposes. They are precisely made, supported in the center, and dimensionally correct. A Full AppleBox is equivalent to two 1/2 Apples, four 1/4 Apples and eight 1/8 Apples (pancake). Basso Blocks supplement conventional Apple Boxes. Their unique designallows them to stack, and to get the same elevating ability as Apples, while occupying 66% less space. A full set of Basso Blocks is equivalent to twenty four 1/4 Apples.

List Price: $ 33.00

Price: $ 33.00

Find More Products

Matthews 2x12" Finger, Solid Black Reviews

Matthews 2x12" Finger, Solid Black

With a similar construction as Dots, only their shape is different. Available in two sizes, 2"x12" and 4"x14". Pin is color coded for easy identification of fabric covering.

List Price: $ 30.24

Price: $ 21.99

Matthews Full Apple Box - 12x8x20"

Matthews Full Apple Box - 12x8x20"

Apple Boxes are some of the handiest tools to have on the set or in the studio. Use them for propping or leveling, sitting or standing. Nail Wall Plates to them to hold low angle lighting fixtures and multiple other purposes. They are precisely made, supported in the center, and dimensionally correct. A Full AppleBox is equivalent to two 1/2 Apples, four 1/4 Apples and eight 1/8 Apples (pancake). Basso Blocks supplement conventional Apple Boxes. Their unique designallows them to stack, and to get the same elevating ability as Apples, while occupying 66% less space. A full set of Basso Blocks is equivalent to twenty four 1/4 Apples.

List Price: $ 33.19

Price: $ 33.19

Find More Products

Matthews 2x12" Finger, Single Scrim Black

Matthews 2x12" Finger, Single Scrim Black

With a similar construction as Dots, only their shape is different. Available in two sizes, 2"x12" and 4"x14". Pin is color coded for easy identification of fabric covering.

List Price: $ 30.24

Price: $ 21.74

Matthews 30x36" Meat Axe Style Flag with Black Textile.

Matthews 30x36" Meat Axe Style Flag with Black Textile.

Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now threesquare corners as opposed to the older design providing just two. In addition, the 48"x48" frames have been squared off with the removal of the mouse ears. Flags are square or rectangular frames with mounting pins attached and covered with a solid cloth material. Used to control light, whether natural or artificial. Flags can be used to protect the camera lens from flares or to control spill light from other sources, or keep light from reaching certain areas on the set. Known as Flags up to sizes 24"x36", larger or more irregular sizes are referred to as Cutters, Floppies are Cutters which have an extra layer of material sewn to one edge and held in place with Velcro until needed at which time the Flag or Cutter becomes twice its original size. Use the number with a (B) after it for Bottom Hinge and the number with a (T) after it to specify Top Hinge. All Matthews Scrims and Flags are bordered with heavy duty color coded webbing.

List Price: $ 70.56

Price: $ 46.95

Related Products

Matthews 48x48" Floppy Cutter with Top Hinge, Black Textile

Matthews 48x48" Floppy Cutter with Top Hinge, Black Textile

Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the 48"x48" frames have been squared off with the removal of the mouse ears. Flags are square or rectangular frames with mounting pins attached and covered with a solid cloth material. Used to control light, whether natural or artificial . Flags can be used to protect the camera lens from flares or to control spill light from other sources, or keep light from reaching certain areas on the set. Known as Flags up to sizes 24"x36", larger or more irregular sizes are referred to as Cutters, Floppies are Cutters which have an extra layer of material sewn to one edge and held in place with Velcro until needed at whichtime the Flag or Cutter becomes twice its original size. Use the number with a (B) after it for Bottom Hinge and the number with a (T) after it to specify Top Hinge. All Matthews Scrims and Flags are bordered with heavy duty color coded webbing.

List Price: $ 150.00

Price: $ 108.95

Matthews 48x48" Solid Frame Scrim with White Artificial Silk

Matthews 48x48" Solid Frame Scrim with White Artificial Silk

To keep weight to a minimum and yet get maximum strength, all Matthews Solid Frames are made of 3/8" thin wall tubing. The mounting pin is solid rod. Matthews Solid Frames are black powder coated to minimize reflections. All Matthews Scrims and Flags re bordered with heavy duty color coded webbing. The Scrim is self extinguishing, and it primarily softens and diffuses direct light, and introduces a significant amount of ambient bounce. The approximate light loss is 1.6 stops.

List Price: $ 126.00

Price: $ 94.95

Westcott Fast Flag 18" x 24" 1/4 Stop China Silk/Chiffon Fabric (#1935 frame not included)

Used for Light Control and Diffusion, The Westcott Fast Flag is a Collapsible and durable carbon steel wire frame which has arms to swing out to 90 degree angles and lock into place. Fabric covers are easily interchangeable. Available in two sizes or in kits with their own storage bag. Fabric covers are available in Single, Double and Triple Nets, Solid Black, China Silk/Chiffon and Artificial Silk.

List Price: $ 30.00

Price: $ 25.00

More Products

Matthews 12x18" Open End Scrim Frame Reviews

Matthews 12x18" Open End Scrim Frame

Matthews 12 x 18 inch Open End Scrim Frame is made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the frame without causing a shadow. Open End Frame is black powder coated to minimize unwanted reflections.

List Price: $ 18.14

Price: $ 17.95

More Products

Matthews 40x40" Cutter with Black Textile

Matthews 40x40" Cutter with Black Textile

Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now threesquare corners as opposed to the older design providing just two. In addition, the 48"x48" frames have been squared off with the removal of the mouse ears. Flags are square or rectangular frames with mounting pins attached and covered with a solid cloth material. Used to control light, whether natural or artificial. Flags can be used to protect the camera lens from flares or to control spill light from other sources, or keep light from reaching certain areas on the set. Known as Flags up to sizes 24"x36", larger or more irregular sizes are referred to as Cutters, Floppies are Cutters which have an extra layer of material sewn to one edge and held in place with Velcro until needed at which time the Flag or Cutter becomes twice its original size. Use the number with a (B) after it for Bottom Hinge and the number with a (T) after it to specify Top Hinge. All Matthews Scrims and Flags are bordered with heavy duty color coded webbing.

List Price: $ 96.00

Price: $ 74.95

Find More Products

Matthews 24" X 30" Black Double Scrim

Matthews 24" X 30" Black Double Scrim

Used to control or manipulate light falling on certain areas of the subject. Made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C Stand handle when not in use. Color coded binding for fabric identification.

List Price: $ 80.64

Price: $ 52.99

Find More Products