RainbowImaging 3.6m TTL Off Camera Remote Cord for Nikon DSLR Camera and Flashgun SB-900, SB-800, SB-600 replaces SC Reviews

RainbowImaging 3.6m TTL Off Camera Remote Cord for Nikon DSLR Camera and Flashgun SB-900, SB-800, SB-600 replaces SC

• This is a special hot shoe collection cable for Nikon camera and flashgun. Flash can be synchronized away from the camera.
• Cable length: 3.6m (Appro)
• Product Size(L*W*H): 34.4mm*30mm*27mm
• Compatible with D3 D3s D700 D2Xs, D2X, D2Hs, D2H, D1X, D1H, D1, D300, D200, D100, D80, D90, D200, D300,
• Support AF-assist light function to the focus, as well which set on the top of the camera,
• Compatible with Nikon Flashes SB-900, SB-800, SB-600, SB-140, SB-50DX, SB-30, SB-27, SB-23, SB-22, SB-22s, SB-21B, SB-20, SB-15, SB-14, SB-11 , etc
• D5000, D3000, D70, D50, D40x & D40 & Fujifilm Finepix Digital Cameras S5 Pro S3 Pro.
• It achieves high-speed synchronous shooting for Nikon cameras and Flashgun, and all the various creative flash mode function,
• It Contains the highest performance i-TTL features such as a maximum shutter sync up to 1/8000S.

Basic Operation:

How to connect the camera with the connector
1. Please make sure the camera power is off before insert the camera connector.
2. Loosen the fixed hot shoe nut by rotating toward right.
3. Plug the camera connector and mount onto the camera hot shoe as the figure.
4. Lock the fixed hot shoe nut by rotating toward left.

How to remove from camera hot shoe
1. Please make sure the camera power had been turned off before remove camera connector.
2. Loosen the hot shoe nut by rotating toward right according to the icon.
3. Pull out connector hot shoe mount from the camera accessory hot shoe.

Connecting to flash unit & Operation:

Install the flash connector on the tripod.
1. Plug the fixed PTZ tripod screw into the flash connector nut and tighten it according to the icon.
2. Install the flash connector hot shoe mount on the PTZ of the tripod.
Install the flash connector on the flash bracket.
Insert the hot shoe mount of flash connector into the flash bracket according to icon.

How to connect to flash unit.
1. Please make sure the flash's power is off before you install the flash mount to the connector.
2. Insert the flash mount into the hot shoe of connector fully.
3. Slide the locking rod of the flash to the right end.
4. When the lock rod sounds like "kacha", the flash with the flash cable is locked.

How to remove from the flash unit
1. Make sure the flash power is off before remove the flash.
2. When press the flash discharge lock button slide the locking rod into the left.
3. Pull out the flash installation mount from the flash connector accessory hot shoe.

Flash unit operation
1. After the flash installed, adjust the flash head.
2. Open the flash power.
3. Select the flash mode.
4. Make sure the flash or camera's preparation indicator light has been lit before shooting

Retail Package Includes
- 1 x E-TTL Off Camera Flash Cord
- English instruction

List Price: $ 20.99

Price: $ 20.99

PIXEL King Receiver For Nikon Wireless TTL Flash Trigger

• FSK 2.4GHZ Wireless System
• Over 100 meters Operation Range
• Max to 1/8000s sync speed
• Support SB-900,SB-910,SB-800,SB-700,SB-600,SB-400
• With PC socket control the studio light also support 1/8000s sync speed.

Package Included:
KING Receiver x1,
PC to 3.5mm studio flash cable x1,
PC to 6.35mm studio flash cable x1,
SF-18 Flash Stand Holder x1,
Receiver holding mount x1(The holding mount is for studio lamp. It has double tape sticker),
Protector Soft Case x1,
English User Manual x1(Original Manufactory Package).

List Price: $ 104.99

Price: $ 76.99

More Products